1.Use double heating oven, heating densed, saving more energy
2.Automatic feeding. heating, blowing with air system.
3.Patented preform feeding system for easy and safety
4.Heating system for each lamp adjustment and constant voltage control system.
5.Touch screen human-machine interface for easy operation
6.Modular component design for easy maintenance.
7.Compact design for effective usage of floor space
8.Intelligence flow control with high pressure valve
A preform Feeding system
The conveyor put the preform from the barrel to the entire machine, then the preform are automatic arranged in order for feeding in a single way, uses servo drive chain feeding system adopt FESTO rotation cylinder to divide into blank movement and positioning. The clipper picks preforms and place them on the transfer system.The way will avoid preforms jamming orwasting preforms.
B Transfer system
The traditional linear machine is normal transmitted by chain or air cylinder, when cylinder drives, the speed is slow, efficiency is down, when chain drives, it is too noisy. AOK series composed of the casting nylon slider with servo motor drive, providing fast and which can meet environmental requirements.
C The heating system
Preforms are feeding to the heating system with the chain moving, together with minimum center between two preforms, in order to make shortest distance to heat, saving more energy preforms go with rotation mode heat and cooling, to ensure heating averagely.
Model | Unit | AOK-4000E | |
| Clamping System | （Number of cavity） | cavities | 4 |
（clamping unit） | KG | 48000 | |
（mold stroke） | mm | 100 | |
（stretch stroke） | mm | 250 | |
(Bottom stroke) | mm | 30 | |
(Cavity pitch) | mm | 76.2 | |
(heating pitch) | mm | 76.2 | |
(Number of holder) | PCS | 114 | |
| Container | (Max.container volume) | ltr | 0.6 |
(Max. neck diameter) | mm | 38 | |
(Max.prefrom height) | mm | 100 | |
(Max.container diameter) | mm | 65 | |
(Max.container height) | mm | 250 | |
(theoretical output) | B.P.H | 4000-6000 | |
| Electrical System |
(heating oven) | UNITS | 44 |
(boxchannel) | Floor | 412 | |
(Number of lamp) | pcs | 48 | |
(heating power) | KW | 57.6 | |
(installed power) | KW | 65 | |
(voltage) | Voltage | 220v/380V/3 phase | |
| Air System | （operating pressure） | kg/cm2 | 7 |
（blowing pressure） | mpa | 3.5 | |
（high pressure air consuming） | L/min | 4200 | |
（power） | KW | 44 | |
| Chiller System | (temperature) | degree | 10-15 |
(pressure) | Mpa | 0.3-0.5 | |
(flow rate) | L/min | 80 | |
(heating power) | HP | 5 | |
| Machine | (machine dimension) | M | 4.81.72.0
|
(machine weight) | KG | 5500 | |
Suositut Tagit: muovinen lemmikkipullon puhalluskone, Kiina, toimittajat, valmistajat, tehdas, tukkumyynti, hinta, halpa, osta alennus
